To Next Page
J
jacksonmonicaJul 28, 2025
How to fix a hard to move caster wheel on Makita XCV19 Vacuum Cleaner?
- ZZachary MccannJul 28, 2025
If the caster wheel on your Makita Vacuum Cleaner is hard to move, clean any debris that may be entangled in it.
How to fix a hard to move caster wheel on Makita XCV19 Vacuum Cleaner?
If the caster wheel on your Makita Vacuum Cleaner is hard to move, clean any debris that may be entangled in it.
How to turn on the LED lamp on my Makita XCV19?
If the LED lamp on your Makita Vacuum Cleaner does not light, press and hold the battery check / LED lamp button during operation to turn it on.
Why does my Makita XCV19 Vacuum Cleaner have weak suction?
If your Makita Vacuum Cleaner has weak suction, several factors could be the cause. The indicator of excess dust might be lit, in which case you should replace the filter bag. If replacing the filter bag doesn't solve the problem, clean or replace the HEPA filter. Also, check for debris clogged in the hose and pipe, or entanglement around the brushroll (body, cap, joint). Ensure the brushroll isn't too high from the floor; lower it if necessary. If the brushroll hair is short, consider replacing it and lowering the brushroll height. Ensure the appliance is not operating in low mode, and that the brushroll, pipe and hose are installed firmly. Change to a higher operating mode if needed.
Why is my Makita XCV19 Vacuum Cleaner making a loud noise?
If your Makita Vacuum Cleaner is making a loud driving noise, try changing to a lower operating mode. Check the brushroll for any entangled debris around the body, cap, and joint. Also, inspect the filter bag and replace it if it's filled with dust. If replacing the filter bag doesn't solve the problem, clean or replace the HEPA filter. Additionally, inspect the hose and pipe for any debris clogs.
What to do if the brushroll does not rotate on my Makita XCV19 Vacuum Cleaner?
If the brushroll on your Makita Vacuum Cleaner isn't rotating, first check if the appliance is locked in an upright position and unlock it. If the indicator of brushroll error is lighting, inspect the brushroll (body, cap and joint) to ensure there is no entanglement.
Why does the dust indicator blink quickly on my Makita Vacuum Cleaner?
If the indicator of excess dust level blinks after only a little use with your Makita Vacuum Cleaner, unfold the entrance of the filter bag before setting it.
General| Brand | Makita |
|---|---|
| Model | XCV19 |
| Category | Vacuum Cleaner |
| Language | English |
Lists compatible battery cartridges and chargers for the appliance.
Basic precautions for safe operation, handling, and use of the appliance.
Details on what not to vacuum and general usage restrictions.
Instructions for connecting, disconnecting, and recharging battery packs.
Covers safe usage, storage, charging, and disposal of battery cartridges.
Prohibits incineration, damage, and incorrect handling of battery cartridges.
Guidance on charging, storage, and temperature for optimal battery performance.
Identifies and names all parts of the cordless upright cleaner.
Steps to assemble the handle pole and secure it with the lock.
Connects the aluminum pipe to the joint and then to the pipe holder.
Installs the hose into the mounting port of the appliance until it clicks.
Guidance on safely installing and removing the battery cartridge.
Step-by-step guide for inserting the battery cartridge and locking the cover.
Instructions for installing the disposable filter bag into the dust box holder.
Explains the system that extends tool and battery life by cutting off power.
Details how the tool stops automatically when drawing abnormally high current.
Describes automatic shutdown when the tool overheats, indicated by blinking lights.
Explains automatic tool stoppage when battery capacity becomes low.
How to check the remaining battery capacity using indicator lamps.
Explains how indicator lamps on the battery show remaining capacity.
Details the function of indicators like operating mode and dust level.
How to change the operating mode (lower noise, normal, high).
Indicates when the filter bag needs replacement due to dust accumulation.
Warns of issues like brushroll overload or abnormal stoppage.
Functionality of the button for checking battery and operating the LED lamp.
How to use the ON/mode change and OFF buttons to operate the appliance.
Instructions for cycling through different operating modes (noise levels).
Guidance on how to use the LED lamp feature.
Using the foot lever to unlock and lock the appliance in an upright position.
How to adjust the brushroll height for different floor types and carpets.
Safe methods for carrying the appliance using wheels or handles.
Step-by-step guide for performing regular floor cleaning with the appliance.
Convenient cleaning of wall corners using the side brush attachment.
Using the hose for cleaning areas near your hands.
Using the aluminum pipe for tight quarters or high places.
How to securely install and disconnect attachments to the pipe or hose.
Guidance on storing the appliance when not in use.
How to clean the exterior of the cleaner body.
Instructions for cleaning or replacing the HEPA filter for optimal performance.
Steps to remove, clean, and reassemble the brushroll.
Procedure to identify and remove clogs from the air intake path.
Lists common issues like 'Not working' or 'Weak suction' with probable causes and solutions.
Lists recommended accessories and attachments for the tool.
Details on how to find warranty terms and conditions.
Warning about chemicals in dust from construction activities known to cause cancer or reproductive harm.
