11 ENGLISH
Cleaning without nozzle
You can pick up powder and dust without nozzle.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off
before attempting to perform inspection or
maintenance.
Cleaning
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening, dust bag/dust pack
mounting area and the dust stopper.
CAUTION:
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
Wash the lter in soapy water when it is clogged with
dust and the cleaner power becomes small. Dry it out
thoroughly before use. An insufciently dried lter may
cause poor suction and shorten the service life of the
motor.
Do not blow dust stlicking on the cleaner by air duster. It
brings dust into the housing and causes failure.
Things to Check Before Asking for Repairs
Symptom Area to be investigated Fixing method
Weak suction power
Not working
Is capsule full of dust?
Is filter clogged?
Is battery exhausted?
Is battery exhausted?
Empty dust from capsule.
Dust down or wash filter.
Recharge battery.
Recharge battery.
NOTE:
• Do not attempt to repair cleaner by yourself.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed
by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
To Next Page
Loading...
Need help?
General
