Need help?Do you have a question about the Makita XPS01 and is the answer not in the manual?
General| Model | XPS01 |
|---|---|
| Category | Saw |
| Type | Circular Saw |
| Battery Voltage | 18V |
| Blade Diameter | 6-1/2" |
| No Load Speed | 5, 000 RPM |
| Arbor | 5/8" |
| Power Source | Cordless |
| Voltage | 18V |
| Max Cutting Depth at 90 Degrees | 57mm |
| Max Cutting Depth at 45 Degrees | 40mm |
| Battery | 18V LXT Lithium-Ion |
| Overall Length | 267mm |
Read all safety warnings, instructions, illustrations, and specifications before use.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Power tool plugs must match the outlet. Never modify the plug in any way.
Stay alert, watch what you are doing and use common sense when operating a power tool.
Use the correct power tool for your application. The correct power tool will do the job better and safer.
Maintain power tools and accessories. Store idle power tools out of the reach of children.
Recharge only with the specified charger. Do not use damaged or modified battery packs.
Avoid contact with ejected liquid. Do not expose battery to fire or excessive temperature.
Never service damaged battery packs. Follow instructions for lubricating and changing accessories.
Keep hands away from the blade. Adjust cutting depth to workpiece thickness. Secure workpiece.
Kickback is a sudden reaction to a pinched, jammed, or misaligned blade. Avoid by taking precautions.
Check guard for proper closing and operation before each use. Ensure it moves freely.
Use extra caution in blind areas. Hold tool firmly. Never force the saw.
Read instructions. Do not disassemble. Avoid shorting terminals. Do not expose to extreme heat or fire.
Charge before fully discharged. Avoid overcharging. Charge at appropriate temperatures.
System automatically cuts off power to protect tool and battery life due to overload, overheat, or overdischarge.
Align tongue with groove and slip into place until it clicks. Slide button to remove.
Press check button to see battery indicators. Indicators correspond to remaining battery levels.
Tool automatically changes between 'high speed' and 'high torque' modes based on work load.
Loosen clamping screw, adjust blade stopper to desired depth, and tighten screw securely.
Button allows setting 2-3mm depth for avoiding splinter when using guide rail.
Loosen clamping screws, tilt to desired angle, tighten screws securely.
Tool helps set designated angles quickly by aligning arrow with scale.
Adjustable bevel angles for 48° and -1° cuts by loosening screws and setting lever.
Align base position 'A' or 'B' with cutting line depending on guide rail use.
Check switch trigger action and lock-off button. Never defeat lock-off button.
Tool has an electric blade brake for quick stopping. Never use without blade guard.
Adjusts blade rotation speed for different materials. Select speed based on workpiece.
Features overload protector, constant speed control, and soft start for ease of use.
Store hex wrench as shown to prevent it from being lost.
Follow procedures to remove or install circular saw blade. Ensure correct orientation.
Clean blade guard of accumulated sawdust when changing blade. Check guard operation before each use.
Connect Makita vacuum cleaner to the dust nozzle using front cuffs for clean cutting.
Move tool forward smoothly. Hold tool firmly with both hands. Avoid forcing or twisting.
Place tool on guide rail, adjust screws for smooth sliding. Cut splinterguard along length.
Use sub base as guide rule for extra-accurate straight cuts. Slide fence against workpiece.
Observe instructions to avoid kickback. Press down slowly to depth, move tool forward.
Bevel guide allows exact miter cuts. Clamp ensures firm hold of workpiece.
Adjust base perpendicularity or 45° angle using adjusting bolt and triangular rule.
List of recommended accessories including blades, guides, clamps, and chargers.
Covers defects in workmanship and materials for one year. Excludes normal wear, abuse, and unauthorized repairs.
To Next Page
