Need help?Do you have a question about the Makita XSL02 and is the answer not in the manual?
General| No Load Speed | 5, 000 RPM |
|---|---|
| Motor | Brushless |
| Battery Voltage | 18V |
| Laser Guide | Yes |
| Power Source | Battery |
| Blade Diameter | 7-1/2 in |
| Arbor | 5/8 in |
| Max Cutting Capacity (Vertical) | 57 mm |
| Max. Cutting Capacity (90°) | 57 mm |
Details model number, blade dimensions, angles, speed, dimensions, voltage, battery types, net weight, and cutting capacities.
Covers safe practices for tool use, workpiece securing, and operational procedures to prevent injury.
Instructions for safe handling, charging, storage, and disposal of battery cartridges.
Guidance on securely fixing the tool to a stable surface to prevent tipping and ensure safe operation.
Instructions for safely installing and removing the battery cartridge from the tool.
Details the system that cuts power to extend tool and battery life.
Explains overload, overheat, and overdischarge protections, and how to check battery capacity.
Instructions for storing and accessing the hex wrench provided with the tool.
Details on how to securely hold workpieces against the fence using the vertical vise.
Procedure for making straight cuts on smaller workpieces using the miter saw.
Instructions for performing slide cuts on wider workpieces for accurate and safe results.
Procedures for recalibrating miter and bevel angles to factory specifications.
Steps to adjust the miter angle for precise cuts, including pointer alignment.
Instructions for cleaning, lubricating, and storing the tool after operation.
To Next Page
