Page 2 of 15
2. TECHNICAL DATA.
temperature measuring range
control temperature range
from -40
O
C to +120
O
C
(decreased by a set hysteresis)
measuring resolution of the temperature
measurer (resolution of control
temperature settings)
• 1
O
C – for the range below -9.9
O
C and over
+100
O
C
• 0.2
O
C – for the range from -10
O
C to +100
O
C
control hysteresis
[programmable parameter]
• from 0.2
O
C to 10
O
C – for the range from
-10
O
C to +100
O
C
• from 1
O
C to 10
O
C – for the range <-10
O
C and
>+100
O
C
operation time of the stirrer / ventilator
[programmable parameter]
standstill time of the stirrer / ventilator
[programmable parameter]
temporary operation time of the stirrer /
ventilator
[programmable parameter]
time delay for switching the chiller (unit)
/ stirrer on after the regulator is turned
on or the power supply decay occurs
length of control sensors
type of temperature sensor
type of temperature measurer
load capacity of relay contacts controlling
the chiller (unit) / heating system
load capacity of relay contacts controlling
the stirrer / ventilator