TRACK MODE
MALEKKOHEAVYINDUSTRY.COM
While in TRACK MODE you can access the
extra slider features labled black for a particu-
lar channel (gates and cv channels).
DIVIDE/MULTIPLY: To DIVIDE an entire
sequence, make sure the GATE output you
want to divide is lit. Now select the TRACK
button and move the DIVIDE/MULTIPLY slider
to the right. The position of the slider affects
the amount of division down to 1/16.
To MULTIPLY an entire sequence, make sure
the GATE output you want to divide is lit. Now
hold the TRACK button down while you move
the slider to the right. You can multiply up to
16.
The LED indicator will let you know how many
times you’ve divided or multiplied.
SEQUENCE LENGTH: To change the length
of a sequence, make sure the GATE output
you want to divide is lit. Now select the TRACK
button and then move this slider slowly to the
right. The LED indicator will let you how many
gates will play in pattern/sequence. Sequence
length goes up to 16 steps per sequence.
NOTE: The gate sequence set to the
longest length will dictate the total length
of that entire preset.
SEQUENCE MODE: To change the direction
of a sequence, make sure the GATE output
you want to divide is lit. Now select the TRACK
button and then move this slider to the right.
The LED indicator will let you know which
direction the sequence will play: FORWARD,
REVERSE, PENDULUM OR RANDOM in this
order. The position of the slider affects which
direction the sequence will play; far right being
RANDOM.
DIVIDE/MULTIPLY
SEQ LENGTH
SEQ MODE
KEY
ROOT
ROOT + 1
ROOT + 2
ROOT + 3
ROOT + 4
ROOT + 5
ROOT + 6
ROOT + 7
ROOT + 8
ROOT + 9
ROOT + 10
VARIGATE 8+
CLK IN
CLK OUT
TRACK
RESET
PROB
CLEARMUTE
RPT
DLY
PW GLIDE
SONG
FREEZE
RND
TEMPO
GATE 1
NOTE
END
SAVE
GATE 3
RECALL
GATE 2
GATE 5
GATE 6
GATE 4 GATE 8GATE 7 CV 2
CV 1
BANK/ALL
ROOT + 11
B
A
G
F
E
D
C
PG. 10
VARIGATE 8+ MANUAL V.2
To Next Page
Loading...