Malmbergs EVC04 Series

Need help?

Do you have a question about the Malmbergs EVC04 Series and is the answer not in the manual?

Summary

SAFETY INFORMATION

SAFETY WARNINGS

General safety instructions and precautions for operating the charging station.

GROUND CONNECTION WARNINGS

Instructions for proper grounding of the charging station for electrical safety.

POWER CABLES, PLUGS and CHARGING CABLE WARNINGS

Safety guidelines for handling power and charging cables to prevent hazards.

WALL MOUNTING WARNINGS

Guidelines for safely mounting the charging station on walls.

GENERAL INFORMATION

1 - INTRODUCTION OF THE PRODUCT COMPONENTS

Overview of the main components of the EVC04 charger models.

2 - PLUG CHARGING CABLE

2.1 - SOCKET EQUIPPED MODEL

Instructions for connecting the charging cable to the socket outlet model.

2.2 - ATTACHED CABLE MODEL

Instructions for connecting the charging cable to the attached cable model.

3 - BEHAVIOUR OF THE STATUS INFORMATION LED

DESCRIPTION

1 - MODEL DESCRIPTION

Details on how to interpret the EVC04 model naming conventions and variants.

2 - MODEL REFERENCES

CONNECTIVITY

MECHANIC SPECIFICATIONS

ENVIRONMENTAL TECHNICAL SPECIFICATIONS

CHARGING

1 - OCPP CENTRAL SYSTEM CONNECTED MODE

Charging procedures when connected to an OCPP central system.

OCPP 1.6 JSON ADDITIONAL FEATURES

1.3.1 - RESERVATION FEATURE

Allows users to reserve the charging station for a specific period.

1.3.2 - REMOTE CHARGE INITIATION; TERMINATION

Enables remote control of charging initiation and termination.

1.3.3 - RESTART

Procedure for restarting the appliance for troubleshooting.

1.3.4 - UNLOCKING THE SOCKET

How a service provider can unlock the charging cable.

2 - STANDALONE USAGE MODES

2.1 - AUTOSTART CHARGING MODE

Charger automatically starts charging when connected.

2.2 - RFID AUTHORIZED MODE

2.2.1 - REGISTERING USER RFID CARD

Steps to add or remove user RFID cards from the charger's list.

2.2.2 - VEHICLE CONNECTION & CHARGING

Steps for connecting the vehicle and initiating charging in RFID mode.

2.2.2.2 - ATTACHED CABLE MODEL

2.2.2.2.1 - VEHICLE CONNECTION & CHARGING

Steps for connecting the vehicle and initiating charging with attached cable.

2.2.2.2.2 - STOP CHARGING

Methods to stop charging for the attached cable model.

2.3 - MOBILE APPLICATION USAGE

2.3.1 - CONFIGURING MALMBERGS EV MOBILE APPLICATION

Guide to setting up the Malmbergs EV mobile application.

2.3.2 - MALMBERGS EV MOBILE APPLICATION CONFIGURATION

Steps for configuring the mobile application with the charger.

2.3.3 - VEHICLE CONNECTION & CHARGING

2.3.3.1 - SOCKET EQUIPPED MODEL

Connecting and charging the vehicle with the socket equipped model via app.

2.3.3.1.2 - STOP CHARGING

2.3.4 - APPLICATION MODES

2.3.4.1 - ECO CHARGE MODE

Mode to optimize charging based on electricity prices.

2.3.4.2 - DELAY CHARGE FUNCTION

Set a delayed start time for charging via the smartphone.

2.3.4.3 - LOCKABLE CABLE FUNCTION

Feature to lock the charging cable to the station.

2.3.4.4 - MASTER AND USER RFID CARD RESET

Procedure for resetting RFID card lists.

2.3.4.5 - POWER OPTIMIZER SETTINGS

2.4 - RFID LOCAL LIST AUTHORIZED MODE & ACCEPT all RFIDS MODE

LOCKED CABLE FUNCTION (Model with Socket)

MID METER MODELS

ERROR AND FAULT CONDITIONS

1 - GENERAL ERROR CONDITION

Troubleshooting steps for a constant red status indicator LED.

2 - OTHER ERROR CONDITIONS

3 - TRIPPING RELAY ON PRODUCTS WITH RESIDUAL CURRENT DEVICE

3.2 DC 6 mA LEAKAGE CURRENT SENSOR BEHAVIOR

CLEANING AND MAINTENANCE