11
MALONE LIMITED WARRANTY
Malone Ballyglass, Claremorris, Co. Mayo, Ireland (hereinafter called “the company”) warrants to the
original retail purchaser that new products sold and registered with the company, shall be, at the time of
delivery, free from defects in material and workmanship, and that such equipment is covered under
Limited Warranty providing the machine is used and serviced in accordance with the recommendations
in the Operator’s manual. This Limited Warranty covers the equipment for a period of one year starting
from the date the equipment is commissioned.
The email or post submission of the pre-delivery inspection (PDI) form by the dealer (importer) is taken
as evidence of the delivery of the machine to the original retail purchaser. This is compulsory, and is
required to record the machine in the Malone warranty system.
These conditions are subject to the following exceptions:
• Parts of the machine which are not of Malone manufacture, such as tyres, tines, PTO shafts, slip
clutches, hydraulic cylinders, etc. are not covered by this Limited Warranty, but are subject to the
warranty of the original manufacturer. Warranty claims applying to these types of parts must be
submitted in the same way as if they were parts manufactured by Malone. However, compensation
will be paid in accordance with the warranty agreement of the manufacturer concerned.
• This Limited Warranty does not apply to failure through normal wear and tear, to damage resulting
from negligence or from lack of inspection, from misuse, from lack of maintenance and/or if the
machine has been involved in an accident, lent out or used for purposes other than those for which it
was intended by the company.
• This Limited Warranty will not apply to any product that has been altered or modified in any way
without the express permission of the company, or if parts not approved by Malone are used in
repair.
• The company take no responsibility for any additional costs, including loss of oil and/ or
consumables incurred during the failure and repair of a product
• The company cannot be held responsible for any claims or injuries to the owner or to the third party,
nor to any resulting responsibility.
• Also, on no account can the company be held liable for incidental or consequential damages
(including loss of anticipated profits) or for any impairment due to failure, a latent defect or a
breakdown of a machine.
The customer will be responsible for the following costs:
• Normal maintenance such as greasing, maintenance of oil levels, minor adjustments, etc. as
specified in the Operator’s manual.
• Labour charges other than originally agreed, incurred in the removal and replacement of
components.
• Dealer’s travel time and travel costs to and from the machine.
• Parts defined as normal wear items such as, but not limited to PTO shafts, chains, tyres, bearings,
tines, slip clutches, etc. that are not covered under the Limited Warranty.
Operator Manual—Topper
To Next Page
Loading...