EasyManua.ls Logo

Malone ProCut 2000 - Safety Information

Malone ProCut 2000
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
SAFETY INFORMATION
In the interest of safety, it is important that great care is adopted at all times during the attachment,
transportation, operation and maintenance of this machine. Both the owner and the operator of the
machine should read and understand the following section to ensure the safety of themselves and all other
persons who enter into the close proximity of these machines. Never operate the machine if unauthorized
persons are in the area. Stop operation of the machine if unauthorized persons approach. Explain to them
the potential hazards so they understand why you will not continue until they have left the area. You are
responsible for safe operation of the Topper. The most important safety device on the equipment is a safe
operator. Hazards associated with topping maybe pinch points, noise exposure, splinters, eye injury,
impact trauma and trip/slip/fall. In addition to the instructions stated here always abide by general safety
and accident regulations.
Never carry out any maintenance or repair work on the unit while the tractor engine is running.
Never carry out any maintenance or repair work on the Topper if it is in a raised position, unless it is
supported independently of the tractor hydraulics in a secure manner.
Never put hands or fingers near the Topper while the tractor is running.
The operator should be wearing reflective safety clothing, hearing protection, a hard hat, steel toe
boots and gloves. Any other persons who will be working nearby must also wear hearing protection.
Person MUST BE OVER 18 to operate these Toppers.
Safety and warning decals placed on the machine give important instructions for safe work take
them into consideration for your safety and the safety of others.
While driving on public roads always abide traffic signs and road regulations.
Familiarise yourself with the controls and functions of the machine and practice them in a safe
location before attempting to work.
Never approach this machine whilst it is working or running. Always switch off the machine and
wait until it has stopped fully before approaching.
Do not wear loose fitting clothing in the vicinity of this machine.
Check no one is near, or on, the machine before attempting to start or transport it. Ensure your
visibility is kept clear at all times.
Implements should always be attached according to the manufacturers instructions and fastened
correctly to the prescribed devices using the correct components.
When disconnecting the machine from the tractor, select a firm level site and use the supports legs.
Take care when disconnecting the machine from the tractor.
Ensure controls for the machine are positioned such that the machine cannot accidentally be started
during transport.
For transportation on the road, prepare and secure the machine according to the manufacturers
instructions.
Never leave the driver seat whilst the tractor of the machine is running.
Never attempt to operate a machine without its safety devices fitted or incorrectly secured.
Always place the machine in a safe position before leaving the tractor. Lower the implement
completely, switch off the engine and remove the ignition key.
Operator Manual—Topper

Related product manuals