What to do if my mamibot iGLASSBOT W120 Ultrasonic Jewelry Cleaner has insufficient suction power?
If your mamibot Ultrasonic Jewelry Cleaner isn't sticking well, first ensure the cleaning pad is correctly attached. If that doesn't solve it, check the glass for cracks. Also, if the glass frames have uneven areas or rubber, manually guide the device away from those spots using the remote control.
Why does the remote control not work on my mamibot Ultrasonic Jewelry Cleaner?
If the remote control for your mamibot Ultrasonic Jewelry Cleaner isn't working, the first step is to replace the battery. If a new battery doesn't solve the problem, the remote control itself may be broken and need replacing.
How to fix a mamibot Ultrasonic Jewelry Cleaner that gets slippery?
If your mamibot Ultrasonic Jewelry Cleaner is slipping or moving erratically, it could be due to a few reasons. The glass or the cleaning pad might be too dirty or wet; try changing the cleaning pad or cleaning the driving treads. You can also try manually restarting it with the remote control.
What to do if mamibot Ultrasonic Jewelry Cleaner can't be started?
If your mamibot Ultrasonic Jewelry Cleaner won't start or is acting strangely, make sure the cleaning pad is properly attached and isn't covering the edge detection sensors. You can also check the app for red indications on the corners of the interface, which would indicate a sensor malfunction. If the sensors have failed, contact after-sales service.
Why is my mamibot iGLASSBOT W120 Ultrasonic Jewelry Cleaner making a squeaky sound?
If your mamibot Ultrasonic Jewelry Cleaner is making a squeaky sound, it might be because the glass is too dry or the edge detection sensors are dirty. Try spraying a little water on the cleaning cloth. Alternatively, clean the edge detection sensors.
What to do if mamibot Ultrasonic Jewelry Cleaner gets stuck?
If your mamibot Ultrasonic Jewelry Cleaner gets stuck on glass frames due to edge-detection misjudgment, press STOP on the remote control and move it to a reachable location. If the remote doesn’t work, gently pull the robot to a safer spot.
What does it mean when both lights flash on mamibot iGLASSBOT W120?
If both the red and blue indicator lights are flashing on your mamibot Ultrasonic Jewelry Cleaner, this indicates a hardware failure. Contact after-sales service for assistance.
How to make mamibot iGLASSBOT W120 Ultrasonic Jewelry Cleaner return to the starting point?
If your mamibot Ultrasonic Jewelry Cleaner isn't returning to its starting point after cleaning, it could be due to differences in the glass surface's friction. Use the remote control to guide it back to a reachable location.
Why does my mamibot Ultrasonic Jewelry Cleaner beep twice in use?
If your mamibot Ultrasonic Jewelry Cleaner beeps twice during use, it's likely because the edge sensor is detecting frameless glass. This is normal behavior when cleaning frameless glass.
Why does the mamibot iGLASSBOT W120 Ultrasonic Jewelry Cleaner remote control not work?
If the mamibot Ultrasonic Jewelry Cleaner remote control isn't working, first replace the battery, as it may be low on power or completely drained. If a new battery doesn't solve the problem, the remote control itself may be broken and require replacement.
General| Brand | mamibot |
|---|---|
| Model | iGLASSBOT W120 |
| Category | Ultrasonic Jewelry Cleaner |
| Language | English |
Important note about using the appliance safely, especially concerning children and supervision.
Guidelines for using the power adapter, handling the battery, and general safety precautions for the device.
Instructions to prevent electric shock, including proper handling of power plugs and device maintenance.
A list of warnings and precautions to follow before and during operation, including safety rope usage and glass type.
Labeled diagrams showing the components of the Mamibot W120 robot window cleaner.
Technical specifications for the robot and its adapter, including model, power, battery, dimensions, and speed.
A list of items included in the product package, shown with images.
Explanation of the functions of each button on the remote control for operating the robot.
Step-by-step instructions with diagrams on how to connect the power adapter and extension cable.
Instructions on how to properly attach and secure the safety rope to the robot and an indoor fixture.
Guidance on selecting the correct cleaning pad and attaching it to the robot's base.
Instructions on plugging the robot into the power supply and important notes about continuous power.
How to turn the robot on/off using the device's button and how to start/stop it on the window.
Steps to power on the robot and initiate cleaning, including placement precautions.
How to stop or pause the robot's cleaning operation using the device or remote control.
Details the functions of the remote control buttons for navigation and cleaning modes.
Instructions on how to safely remove the robot from the window after cleaning is complete.
Guide on downloading and connecting the iGlassbot app to control the robot via smartphone.
Instructions on how to clean and reuse the cleaning pads, with a note on usage.
How to clean the robot's fan using a dry cloth to remove dust and debris.
How to clean the edge detection sensors with a dry cloth to ensure proper function.
How to clean the robot's driving treads and belts with a dry cloth.
To Next Page
