Why is my mamibot iGLASSBOT W120-T Vacuum Cleaner remote control not working?
The remote control might not be working because there's no battery inside, the battery has low power, or the remote control is broken. Try changing the battery. If that doesn't work, replace the remote control with a new one.
What to do if my mamibot iGLASSBOT W120-T gets slippery or works in irregular patterns?
If your device is getting slippery or working in irregular patterns, it could be due to several reasons: * The glass is too dirty or too wet, in this case, change the cleaning pad. * The cleaning pad is too dirty or too wet, in this case, clean the driving treads. If these steps don't resolve the issue, use the remote control to manually restart the device.
What to do if my mamibot iGLASSBOT W120-T Vacuum Cleaner is making a squeaky sound when it’s in use?
The squeaky sound during operation could be due to the glass being too dry or the edge detection sensors being too dirty. Try spraying a little bit of water on the cleaning cloth. If the issue persists, clean the edge detection sensors and try operating the device again.
What to do if my mamibot iGLASSBOT W120-T Vacuum Cleaner got stuck on glass frames?
If the device gets stuck on glass frames, it may be due to edge-detection misjudgment. Press STOP on the remote control to move the device. If you can’t control it remotely, pull the robot lightly to a reachable location.
What to do if my mamibot iGLASSBOT W120-T Vacuum Cleaner doesn’t return to Starting Point after cleaning?
If the device doesn’t return to the starting point after cleaning, it may be because the glass surface’s friction index is different. Use the remote control to direct the device to return to a reachable location.
What to do if both Red and Blue Light on, no beeps on mamibot iGLASSBOT W120-T?
If both Red and Blue lights are on, and there are no beeps, it indicates that the device is not sucking properly on the window. Put the device on the window surface manually, and ensure it sucks on the window properly.
Why my mamibot iGLASSBOT W120-T can’t be started after switched on, or works in irregular patterns?
If the device can’t be started after being switched on or works in irregular patterns, it may be due to an abnormal edge detection sensor. Remove the cleaning pad and reattach it, making sure it is placed exactly within its Velcro area and does not cover the edge detection sensors.
What does it mean if red indicator light once per second on mamibot iGLASSBOT W120-T Vacuum Cleaner?
A red indicator light flashing once per second indicates an improper connection of the Power Supply. Check if the plug is connected well, or the screws of the extension cables are placed tight.
Important initial notes and warnings for safe appliance usage before operation.
General safety guidelines covering power adapter, battery, operating environment, and handling precautions.
Specific warnings and precautions to prevent electric shock hazards during operation and maintenance.
Critical warnings covering safety rope, operation on glass, frameless glass, and body part safety.
Technical specifications of the robot, including model, power, battery, dimensions, and adapter details.
Instructions on securely attaching the safety rope to the robot and an indoor fixture.
General| Brand | mamibot |
|---|---|
| Model | iGLASSBOT W120-T |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page
