EasyManua.ls Logo

mamibot EXVAC880 Wisor - User Manual

mamibot EXVAC880 Wisor
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
myRobotcenter
The expert for robots in your home
With one click to the online shop
myRobotcenter.eu myRobotcenter.co.uk

Questions and Answers

  • H
    Hannah MooreAug 18, 2025
    Why is the suction power of my mamibot Vacuum Cleaner weak?
    • J
      Jennifer PowersAug 18, 2025
      If the suction power of your mamibot Vacuum Cleaner is weaker than usual, try the following: * Clean and empty the dust box. * Clean the pre-filter, foam filter, and HEPA filter, ensuring they are dry. * Clean the rolling brush. * Clean the suction inlet.
  • A
    Alexis JohnsonAug 20, 2025
    What to do if my mamibot EXVAC880 Wisor Vacuum Cleaner goes back to recharge before finishing cleaning?
    • S
      Scott RyanAug 20, 2025
      If your mamibot Vacuum Cleaner returns to the charging base before completing the cleaning cycle: * Ensure the device is fully charged, as the battery power may be lower than 20%. * Try rebooting the device by turning the main power switch off and then on again.
  • T
    taylorbrookeAug 22, 2025
    What to do if my mamibot EXVAC880 Wisor Vacuum Cleaner cannot be activated?
    • L
      Laura ParkerAug 23, 2025
      If your mamibot Vacuum Cleaner fails to activate, consider the following: * Ensure the main power switch is turned on. * Make sure the device is fully charged. * Replace the remote control batteries with new AAA batteries. * Ensure the remote control is within 5m/16ft of the device. * Try controlling the device via the app, as it may not respond to the remote control while on the charging dock.
  • S
    Shannon BlakeAug 26, 2025
    What to do if my mamibot Vacuum Cleaner does not work as scheduled?
    • A
      andrewjacksonAug 26, 2025
      If your mamibot Vacuum Cleaner isn't working according to its schedule: * Ensure the main power switch is turned on. * Note that rebooting the device cancels the scheduled time; please reset it via the app. * Ensure the device is fully charged. * Check that the device is not stuck.
  • D
    Debra HarperAug 28, 2025
    What to do if the remote control of my mamibot EXVAC880 Wisor does not work?
    • L
      Lindsay TaylorAug 28, 2025
      If the remote control for your mamibot Vacuum Cleaner isn't functioning, try these steps: * Replace the batteries with new AAA batteries. * Ensure the remote control is within 5m/16ft of the device. * Make sure the main power switch is turned on.
  • J
    Jose YoungAug 30, 2025
    What to do if my mamibot EXVAC880 Wisor Vacuum Cleaner stops working suddenly?
    • R
      Robert ThorntonAug 30, 2025
      If your mamibot Vacuum Cleaner suddenly stops working: * Check the battery power. * Ensure it is not in Spot Cleaning mode, as it only works for 30 seconds in that mode. * Check for any obstacles that may be trapping the device. * Try rebooting the device by turning the main power switch off and then on again.
  • M
    Matthew HubbardSep 2, 2025
    How to fix abnormal working path of my mamibot EXVAC880 Wisor?
    • A
      angela26Sep 2, 2025
      If your mamibot Vacuum Cleaner's working path is abnormal: * Remove objects like cables and shoes from the floor. * Clean the infrared sensors and bumper with a soft cloth. * Ensure the wheels are dry. * Upgrade to the latest firmware version via the app settings. * Reboot the device by turning the main power switch off and then on again.
  • B
    butlerashleySep 4, 2025
    How to fix mamibot EXVAC880 Wisor Vacuum Cleaner that is bouncing up and down?
    • M
      Mark JordanSep 4, 2025
      If your mamibot Vacuum Cleaner is bouncing up and down, check if the L and R brushes are installed in reverse. If so, reinstall them correctly.
  • Y
    Yesenia CooperSep 7, 2025
    Why my mamibot Vacuum Cleaner cannot connect to Wi-Fi network?
    • E
      Erik CurrySep 7, 2025
      If your mamibot Vacuum Cleaner cannot connect to your Wi-Fi network: * Ensure that your router network supports 2.4GHz. * Keep the router, the device, and your smartphone closer to each other, and follow the connection instructions in the manuals and app.
  • K
    Kevin ProctorSep 9, 2025
    Why my mamibot Vacuum Cleaner cannot be charged?
    • O
      Olivia BurkeSep 9, 2025
      If your mamibot Vacuum Cleaner isn't charging: * Ensure the adapter correctly connects the power supply to the charging dock and that the indicator lights up. * Clean the charging poles on both the charging base and the device with a dry, soft cloth, then try charging again. * Try charging the device directly with the adapter.

Summary

Safety Instructions

How to remove the battery

Steps to safely detach the battery from the Wisor robot.

To know Wisor

Wisor Working Mode

To use Wisor

Notice Before Use

Important pre-operation checks and environmental considerations for Wisor.

Start, Stop, and Pause Operations

Instructions for starting, stopping, and pausing the Wisor robot.

Charging your Wisor

Charging Setup and Methods

Details on preparing the charging base and connecting the Wisor for charging.

Charging Instructions

Wi-Fi Setup and App Control

Wi-Fi Connection Requirements

Prerequisites for connecting Wisor to your Wi-Fi network.

Weback App Integration

Instructions for downloading, logging into, and connecting the Weback app to Wisor.

Cleaning and Maintenance

Troubleshooting

Name and Content of Hazardous Substances

mamibot EXVAC880 Wisor Specifications

General IconGeneral
ModelEXVAC880 Wisor
CategoryVacuum Cleaner
Suction Power2000 Pa
Battery Capacity2600 mAh
Battery TypeLithium-ion
Run Time120 minutes
Charging Time4-5 hours
Dustbin Capacity600 ml
Water Tank Capacity300 ml
Weight2.7 kg
Filter TypeHEPA Filter
Remote ControlYes
Wet MoppingYes
Noise Level55 dB
NavigationGyroscope
ControlApp and Remote Control
FeaturesScheduled Cleaning

Related product manuals