mamibot EXVAC660 Platinum

Questions and Answers

E
ericpierceAug 4, 2025
Why is the mamibot Vacuum Cleaner remote control not working?
- S
  Sherry WattsAug 4, 2025
  The remote control may not be working due to several reasons: the distance might be too large, the robot or remote control may be low on energy, the infra-red beam could be blocked, or interference from other devices. To resolve this, replace the batteries in the remote, ensuring they are correctly positioned. Also, ensure the robot is turned on and has sufficient energy. Clean the signal transmitter on the remote and the receiver on the robot. Avoid using the remote near other devices using infra-red signals.
R
Robert FowlerAug 11, 2025
What to do if mamibot EXVAC660 Platinum does not perform cleaning work as planned?
- O
  Oscar KellyAug 11, 2025
  If the robot isn't cleaning as expected, it might be off, have low energy, or be stuck. First, ensure the robot is turned on. If the robot had a low energy level, allow it to charge. Also, turn the robot off, clean the dust bin, and make sure the wheels, brushes, and sensors are clean.
S
Sonia BradleyAug 18, 2025
Why does mamibot EXVAC660 Platinum Vacuum Cleaner return to the docking station before completing the job?
- S
  Steven MooreAug 18, 2025
  The robot may return to the docking station early because it detected a low power level and needs to recharge, or because it works differently on different surfaces. Note that the operating time varies depending on the environment's complexity, the amount of waste, and the cleaning mode.
J
Jennifer LopezAug 26, 2025
What to do if mamibot EXVAC660 Platinum Vacuum Cleaner is stuck?
- A
  alisha59Aug 26, 2025
  If the robot is stuck, it may be due to loose cables or carpet fringing. The robot will attempt to free itself automatically. If it cannot, you will need to assist the robot manually.

Summary

Welcome and Introduction

Safety Instructions

Main Body and Accessory Safety

Precautions for the main body and accessories, including warnings and attention points.

Rechargeable Battery Safety

Safety guidelines for the rechargeable battery, including dangers and attention points.

Battery Removal Procedure

Step-by-step instructions for safely removing the robot's battery.

Product Components

Names of Parts

Identifies and illustrates the main parts and accessories of the robot vacuum cleaner.

Product Specifications

Details the technical specifications including dimensions, voltage, capacity, and performance.

Product Characteristics

Highlights key features like humanized design and washable dust box.

Instructions for Use

Remote Control Instructions

Explains the functions and usage of the remote control buttons and modes.

Operating Instructions

Guides on charging base placement, startup, pause, sleep, and mode selection.

Product Maintenance

Side Brush Cleaning and Replacement

Instructions on checking, cleaning, and replacing the robot's side brushes.

Dust Box and Filter Cleaning

Steps for removing, emptying, cleaning, and reinstalling the dust box and filters.

Rolling Brush Maintenance

Guidance on opening and cleaning the robot's rolling brush components.

Other Component Maintenance

How to clean the charging plate, sensors, and charging base terminals.

Replaceable Modules

Overview of parts that can be replaced and the product's application range.

Common Faults

Troubleshooting Common Issues

Lists common faults, possible reasons, and solutions for robot vacuum operation.

mamibot EXVAC660 Platinum Specifications

General

Model	EXVAC660 Platinum
Type	Robot Vacuum Cleaner
Suction Power	2000 Pa
Battery Capacity	2600 mAh
Run Time	120 minutes
Charging Time	4-5 hours
Dustbin Capacity	600 ml
Control Method	App, Remote Control
Filter Type	HEPA Filter
Water Tank Capacity	300 ml
Cleaning Modes	Auto, Spot, Edge, Single Room
Dust Capacity	600 ml
Weight	3.5 kg
Features	Mopping Function