Drive Modes (continued)
43 44
P
Av
Tv
M
X
CF
C1
C2
C3
P
Av
Tv
M
X
CF
C1
C2
C3
P
Av
Tv
M
X
CF
C1
C2
C3
For instructions about the self timer function,
see page 66.
Self Timer Mode ( )
In this mode, the shutter will be released after the set time once the shutter button has
been pressed.
PL Normal PH
Program AE (P)
The aperture and shutter speed are determined automatically for the optimum
exposure, according to the existing ambient light. This mode is best suited for general
photography, allowing the user freedom to concentrate on the subject.
Exposure Modes
If a correct exposure cannot be obtained, the shutter speed and aperture value
blink. In such cases, the pictures can be taken but they may turn out too bright or
too dark.
Turn the exposure mode setting dial to “P”
(program AE) position.
Program Shift (PH / PL)
You can change the shutter speed and aperture by turning the front dial in the “P”
(Program AE) mode. In order to avoid blurred images (shake while releasing the
shutter), or to open the aperture, change to “PH” (high speed). For slower shutter
speeds and wider depth of field, change to “PL” (low speed). This function allows you
to make these changes quickly.
To Next Page
Loading...
