Mamiya Leaf Aptus II 8 User Manual

The Leaf Aptus II 8 is a medium format digital back with a sensor size of 44x33mm with
an active pixel count of 7,312 X 5,474 making it a 40 megapixel size.
This back has a built in adapter to making it compatible with Hasselblad V series
mounts. It mounts to the Hasselblad 500 series cameras the same as the Phase One
H5.
Overall view! ! ! !
!!!!!!!!!Left View
!!!!!!!
!Right View!!!!!!Top View
Leaf Aptus II 8
Users Guide
1

Mamiya Leaf Aptus II 8 Specifications

General

Brand	Mamiya
Model	Leaf Aptus II 8
Category	Camera Accessories
Language	English

Summary

Leaf Aptus II 8 Overview

Product Description

Details the Leaf Aptus II 8's specifications and compatibility, including sensor size and megapixel count.

Digital Back Views

Illustrates the overall, left, right, and top external views of the digital back.

Mounting and Adapter Installation

Bottom View and Sensor

Shows the bottom of the digital back and the sensor area.

Adapter Plate Setup

Instructions for attaching the adapter plate for Phase One sliding backs.

Securing the Back to Adapter

Steps for rocking the back onto the adapter and sliding the latch to capture tabs.

Connectivity and Cable Management

Firewire 800 Cable Attachment

Guides on correctly attaching the Firewire 800 cable to the digital back.

View Camera Cable Connections

Details cable connections for view camera use, including PC post and socket.

Sliding Back Types and Operation

Comparison of Sliding Backs

Differentiates between Kapture Group and Phase One sliding backs.

Center of Travel Alignment

Ensures the Phase One sliding back is correctly positioned at the center of travel.

Connecting to Capture One

Initial Computer Connection

Steps for attaching the digital back to the computer and seeing initial dialogs.

Capture One Software Setup

Guides on selecting the correct camera body and configuring Capture One.

Provider Section Verification

Checks Capture One preferences to ensure the 'Leaf' provider is selected.