Mammoth Classic - Troubleshooting Common Issues

Mammoth Classic
TM
Air Purier User Guide
Visit us at: www.mpurier.com For Questions Call: 800.470.4201
11
If you suspect a problem with your unit check the following:
• Make sure plate is clean (see above).
• Unit is plugged in properly and turned on.
• Check the fuse to make sure it is installed properly and not burned out. To
replace fuse, push in and turn fuse holder to the left, remove old fuse, replace
with spare. Use 1 amp fuse, 1.25 inches long.
• Wall outlet is active
• Check plate alignment making sure the ceramic plate is almost ush with back
of unit.
• It is important that the Classic Air Purier be properly grounded to avoid potential
shock. If the fan is not operating or after cleaning the plate no buzzing sound
is detected on the high setting of the O3, please contact your local dealer.
TROUBLESHOOTING