Mammoth Classic - Setting Up Your Air Purifier; Installing the Ozone Plate; Optimal Air Purifier Positioning

Mammoth Classic
TM
Air Purier User Guide
© 2015 Mammoth Classic Air Purier | Version 2015
6
SETTING UP YOUR AIR PURIFIER FOR OZONE
Good news! Your air purier is ready to use right now. However, if you would like
to use the ozone feature, see below for plate insertion instructions.
To Install the Ozone Plate
1) Unplug power cord.
2) Remove the lter by unscrewing (2) two hand screws located top of lter.
3) Insert the ozone plate with arrow pointing forward (front of unit).
For Optimal Air Purier Position
The ideal location is to place the air purier at a central location on a counter top,
shelving or any space above ground. Since ozone is heavier than air, elevated
placement will allow for more effective usage of ozonator. If you must, there is no
problem with the air purier on the oor or in the corner of the room.
Always allow at least three inches of space between the back and the side of the
unit from the wall or other objects to allow for proper airow suction.
We suggest positioning the air purier in the room or area that is close to the
primary source of odor.
If you desire to use the ozone for the entire home via the home’s HVAC system,
set the fan switch on your home’s heating & cooling system to the ON position
(rather than AUTO.) Place the air purier facing an air return vent with the ozone
generator turned ON.