SERVICE PRODUCTS / SPECIFICATIONS
Application and temperature range Item name / specification Alternative specification
WE/BEM - 52 Initial fill service product in bold type.
GREASING POINTS
Periodic lubrication.......
Operating temperature up
to 130 °C ...............................
All nipple-type and loose
greasing points, such as:
Linkages and wire cables,
engine regulator, clutch and
gearchange system, tipper
pins, spare wheel hoist, cab
tilt mechanism: locking
mechanism, carrier frame for
interchangeable bodies:
centre pin thread, centring
roller mounts, brake camshaft
bearings on rear axle, spring
pins, slack adjuster and ball
joints etc.
Important! Lubricate steering
knuckles and grease wheel
bearings / wheel hubs, MAN
284 Li–H 2, see page 48
Multipurpose grease MAN 283 Li–P 2.......
Multipurpose grease (lithium-12-
hydroxistearate type)
+ EP additive package, NLGI
class 2, drop point min. 180 °C
Without solid lubricants
(graphite, MoS
2
)
In extremely cold
application conditions ......
Down to –50 °C...................... DEA Discor 8 EP 2.................................... Lithium complex grease with
synthetic base oil,
NLGI class 2,
drop point min. 230 °C
To Next Page
Loading...
Need help?
General
