Man D 2840 LF User Manual

SERVICE PRODUCTS / SPECIFICATIONS
Application and temperature range Item name / specification Alternative specification
Initial fill service product in bold type.
W
E/BEM - 53
Periodic
lubrication
......................
(continued)
Lubricating vehicle door
locks, outside handle..............
(grease for lock barrels)
Fuchs RENOCAL FN 745/94 (MAN no.:
09.15004–0027)........................................
Optitemp TT 1 (spray) (MAN no.:
09.15014–0024)........................................
Water-resistant lubricating
grease, NLGI class 1/2, drop
point min. 120 °C
Operating temperature up
to 150 °C................................
Gearbox input shafts,
propshaft joints and
intermediate bearings,
propshafts on eddy current
brakes, double cardan shafts,
eccentric shaft bearings on
fan tensioning pulley
Long-life lubrication: Rear
axle brake camshafts, brake
shoe pins.
Lubricating steering knuckle.
Greasing wheel bearings / hubs
(except hub unit), see page 48
High-temperature grease
MAN 284 Li–H 2........................................
Lithium complex grease with
mineral oil, NLGI class 2,
NLGI class 2,
drop point min. 230 °C
Fifth wheel coupling................
(if not connected to central
lubrication or maintenance-
free)
Multipurpose grease MAN 285 Li–PF 2....
Multipurpose grease (lithium-12-
hydroxistearate type)
+ EP additive package + MoS
2
,
NLGI class 2,
drop point min. 180 °C
Lifetime
lubrication
Grease fill: Wheel hub
..
Wheel bearing units................
Hub units = maintenance-
free; for repairs only
High-temperature grease MAN 284 Li–H 2
Lithium complex grease with
mineral oil, NLGI class 2,
drop point min. 230 °C

Man D 2840 LF Specifications

General

Brand	Man
Model	D 2840 LF
Category	Engine
Language	English