Commissioning and operation
19
Raw water pump
Do not let raw water pump run dry.
Make sure that all valves / cocks in the
raw water circuit are open.
If there is a risk of frost, drain the raw wa-
ter pump.
Filling with engine oil
Caution:
Do not add so much engine oil
that the oil level rises above the
max. marking on the dipstick.
Overfilling will result in damage to
the engine.
The engines are as a rule supplied with-
out oil.
Pour oil into engine via filler neck (arrow),
see page 46.
For the quantity required see “Technical
Data”.
Oil
To Next Page
Loading...
