EasyManua.ls Logo

Man D 2866 LE 403

Man D 2866 LE 403
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Man D 2866 LE 403 and is the answer not in the manual?

Man D 2866 LE 403 Specifications

General IconGeneral
Engine ModelD 2866 LE 403
Number of Cylinders6
Fuel TypeDiesel
Compression Ratio17.5:1
WeightApprox. 1100 kg
Power Output403 hp
Torque1900 Nm at 1200-1500 rpm
Fuel SystemDirect injection
Cooling SystemLiquid Cooled
AspirationTurbocharged
Bore x Stroke128 mm x 155 mm
Engine TypeInline 6-cylinder diesel engine

Summary

Safety Instructions

General Information and Accident Prevention

General safety notes and procedures to prevent injuries to persons.

Preventing Engine Damage and Environmental Harm

Guidelines to avoid damage to the engine and protect the environment.

Trouble Shooting Table

Fuel System Maintenance

Checking and Adjusting Fuel Delivery Start

Procedure for checking and setting the fuel delivery start point.

Cooling System Maintenance

Coolant Management

Procedures for draining and filling the engine's coolant system.

Lubrication System Maintenance

Oil Filter Change

Procedure for changing the engine oil filter.

Flywheel and Crankshaft Seal Maintenance

Vibration Damper and Front Crankshaft Seal

Procedures for removing the vibration damper and changing the front crankshaft seal.

Intake and Exhaust System Maintenance

Turbocharger Troubleshooting and Maintenance

Guidance on troubleshooting turbocharger issues and performance checks.

Cylinder Head and Valve Train Maintenance

Cylinder Head Procedures

Steps for removing, installing, and checking the cylinder head.

Valve Clearance and Timing

Procedures for setting valve clearance and checking valve timing.

Compression Check

Method for checking engine compression.

Valve Timing Procedures

Crankgear and Piston Procedures

Crankshaft Procedures

Steps for removing, installing, and checking the crankshaft and its bearings.

Piston and Connecting Rod Procedures

Tasks for removing, installing, and changing pistons, connecting rods, and rings.

Related product manuals