Man D 2866 LE 403

1
2
3
4
Disassembling and assembling rocker arms
86
Fig. 1
Remove rocker arms.
Fig. 2
Unclip circlip.
Fig. 3
Take rocker arms off the rocker arm shaft.
Note:
If the rocker arm bearing bushes have to be
exchanged, ready-to-install new or recondi-
tioned rocker arms are to be used.
Fig. 4
Before fitting the rocker arms (1) to the rocker arm
shafts and brackets, coat sliding faces (2 and 3)
with Optimoly Paste White T. This applies to both
new and already used parts.
3524
3525
3526
2812
1 2
23