Need help?Do you have a question about the Man D 2866 E and is the answer not in the manual?
General| Engine Model | D 2866 E |
|---|---|
| Engine Type | Diesel |
| Number of Cylinders | 6 |
| Cylinder Arrangement | Inline |
| Bore | 128 mm |
| Stroke | 155 mm |
| Aspiration | Turbocharged |
| Fuel System | Direct Injection |
| Torque | 1250 Nm |
Provides foundational safety rules for operating and maintaining diesel engines.
Details safety measures for maintenance, checking, setting, and repair work on the engine.
Outlines procedures to avoid engine damage, premature wear, and environmental harm.
Covers safe handling of engine oil and precautions for parts containing asbestos.
Illustrates engine components and describes general engine design and timing.
Explains the fuel system, filters, turbocharger, intercooler, cooling, and air cleaner systems.
Describes the alternator and starter motor components and their functions.
Guides through engine preparations, initial filling, and the starting procedure.
Covers running-in recommendations and critical parameters during engine operation.
Details safe engine shutdown, alternator operation, and temporary engine storage.
Instructions for checking oil level, drainage, refilling, and oil filter replacement.
Covers fuel quality, injection pump, bleeding fuel system, and fuel filter servicing.
Outlines the process for injector removal, cleaning, and installation.
Guides on filling coolant, draining, cleaning radiator, inside systems, and removing deposits.
Details maintenance for dry and viscous air cleaners, including cartridge replacement and cleaning.
Describes how to check and set the engine's injection pump start of delivery timing.
Explains procedures for adjusting valve clearance and tightening cylinder head bolts.
Covers checking V-belt tension, changing belts, and replacing them if necessary.
To Next Page
