Technical data
37
Start of delivery ± 1° crank angle before TDC (Speed constant = without timing ad-
justment)
D 2866 LE 201
with optimised
consumption
with optimised
NO
X
1500 1/min, constant 16° 8°
1800 1/min, constant 16° 12°
D 2866 LE 202
1500 1/min, constant 16° 8°
1800 1/min, constant 16° 10°
D 2866 LE 203
1500 1/min, constant 16° 11°
1800 1/min, constant 17° 14°
D 2866 LE 211
1500 1/min, constant 16° 9°
1800 1/min, constant 16° 12°
Engine lubrication Force feed
Oil capacity in oil sump (litres) min. max.
deep 24 l 30 l
deep, on-board unit 14 l 18 l
shallow 16 l20 l
Oil change quantity (with filter)
deep 33 l
deep, on-board unit 21 l
shallow 23 l
Oil pressure during operation (depend-
ing on oil temperature, oil viscosity
class and engine rpm)
must be monitored by oil pressure moni-
tors / gauges
Oil filter Full-flow filter with paper filter elements
Engine cooling system Liquid cooling
Coolant temperature 80−90°C, temporarily 95°C allowed
Electrical equipment
Starter 24 V; 5.4 kW
Alternator 28 V; 35 or 55 A
To Next Page
Loading...
Need help?
General
