EasyManuals Logo

Man D2842 LE602 User Manual

Man D2842 LE602
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
Maintenance and care
25
Filling with engine oil
Caution:
Do not add so much engine oil that the oil
level rises above the max. marking on the
dipstick. Overfilling will result in damage
to the engine.
Pour in fresh oil through oil filler neck (1). Ac
cording to variant, this is either on the cylinder
head cover or on the oil pan.
After filling start the engine and let it run for a few
minutes at low speed.
Caution:
If no oil pressure builds up after approx.
10 seconds switch off the engine imme
diately.
Check oil pressure and check that there is no oil
leakage.
Then shut down the engine. After about 20 minu
tes, check the oil level.
D Pull out dipstick
D wipe it with a clean, lintfree cloth
D and push it in again up to the stop
D Pull out dipstick again
The oil level should be between the two notches in
the dipstick and must never fall below the lower
notch. Top up oil as necesary. Do not overfill.
1
1
Oil
?
MIN
MAX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Man D2842 LE602 and is the answer not in the manual?

Man D2842 LE602 Specifications

General IconGeneral
Bore128 mm
Stroke142 mm
Fuel TypeDiesel
Engine ModelD2842 LE602
ManufacturerMAN
Fuel SystemCommon Rail
AspirationTurbocharged
Cooling SystemLiquid-cooled
Emission StandardsEU Stage IIIA
Displacement21.93 L

Related product manuals