Commissioning and operation
97
Main fuses for voltage supply + / - to the en
gine
Two main fuses with 50 A are fitted at the engine;
these trip in the event of overcurrent or short cir
cuit.
If a fuse as blown, the engine can no longer be
started.
The fuses can be reset by the operator using the
keys fitted.
Main fuse on the control unit carrier EDC
A further 3 main fuses (arrow) are installed on the
control unit carrier.
These fuses blow in the event of overcurrent or
short circuit.
The fuses can be reset by the operator using the
keys fitted.
To Next Page
Loading...
