Tests
To check whether the specification provided and/or the necessary delivery
conditions are complied with, we recommend you retain at least one sample
of every bunker oil (at least for the duration of the engine's warranty period).
To ensure that the samples taken are representative of the bunker oil, a sam-
ple should be taken from the transfer line when starting up, halfway through
the operating period and at the end of the bunker period. "Sample Tec" by
Mar-Tec in Hamburg is a suitable testing instrument which can be used to
take samples on a regular basis during bunkering.
To ensure sufficient cleaning of the fuel via the separator, perform regular
functional check by sampling up- and downstream of the separator.
Analysis of HFO samples is very important for safe engine operation. We can
analyse fuel for customers at MAN Diesel & Turbo laboratory PrimeServLab.
Sampling
Analysis of samples
2017-07-11 - de
Specification of heavy fuel oil (HFO) D010.000.023-05-0001
General
MAN Diesel & Turbo
010.000.023-05
D010.000.023-05-0001 EN 13 (13)
To Next Page
Loading...
Need help?
General
