Need help?Do you have a question about the Man L27/38S and is the answer not in the manual?
General| Brand | Man |
|---|---|
| Model | L27/38S |
| Category | Portable Generator |
| Language | English |
Specifies vibration limits and measurement points for GenSets and turbochargers.
Details exhaust gas constituents and their properties.
Outlines emission limits for plants according to Worldbank II regulations.
Details recommended overhaul intervals and expected life times for engine components.
Describes the engine's construction, frame, base frame, cylinder liner, and valves.
Lists key specifications like cycle, configuration, bore, stroke, and power range.
Diagram and description of the internal fuel oil system, including filters.
Describes a tuning method for GenSets optimizing performance at low and part load.
Outlines prerequisites, specifications, and important considerations for HFO.
Details specifications and properties for Maritime Diesel Oil (MDO).
Lists properties and test procedures for gas oil/diesel oil (MGO).
Provides specifications and properties for various types of biofuel.
Details properties and test methods for crude oil specifications.
Covers aspects of using low sulphur fuel oil and distillates with GenSets.
Describes the calculation and correction factors for SFOC.
Provides fuel consumption data for emissions standards at different load levels.
Diagram and description of the internal lubricating oil system.
Details specific lubricating oil consumption (SLOC) for various engine types.
Specifies the required quality of lubricating oil for engine operation.
Provides guidelines for crankcase ventilation system design and connections.
Outlines specifications and limit values for HFO lubricating oil.
Details specifications and limit values for lubricating oil with MGO/MDO and biofuels.
Provides specific lubricating oil consumption data for various engine types.
Lists criteria for evaluating lubricating oil condition and replacement.
Covers general treatment, maintenance, and operation on different fuel types.
Details requirements and properties for engine coolant.
Outlines quality requirements for compressed air for starting, control, soot blowing, and atomization.
Covers exhaust back-pressure, piping dimensions, and mounting.
Explains SCR technology, components, and operation for NOx reduction.
Describes starting procedures for HFO and MDO, including prelubricating.
Details various protection functions for alternators and generators.
Covers mounting procedures, checks, and instructions for resiliently mounted generating sets.
Outlines the shop test program for power plants, including operating points and load application.
Lists spare parts for unrestricted service according to classification societies and MAN Diesel & Turbo standards.
To Next Page
