Maintenance and Care
MAN marine diesel engines D2868 LE4.. / D2862 LE4..
77
Carefully read through the Operating Instructions before starting any work!
This particularly applies to the General Safety Instructions section
and the safety instructions in the various chapters.
Changing oil filter cartridges
S Unscrew oil filter cover
1
with O-ring
3
and oil
filter insert
2
and then remove.
S Remove oil filter insert
2
and O-ring
3
from oil
filter cover
1
.
S Clean oil filter cover
1
.
S Fit new O-ring
3
on oil filter cover
1
.
S Insert new oil filter insert
2
into oil filter cover
1
.
S Insert oil filter cover
1
into the oil module and
then tighten.
Tightening torque 40 Nm.....................
The second filter insert is changed in the same
way.
Oil grade
The engines are only allowed to be operated with high-performance diesel engine oil to Works Standard
M3277.
NOTE
MAN accepts no liability for material defects caused by the use of non-approved fuels, lubric
ants and coolants.
No liability for material defects can be accepted if non-approved fuels, lubricants and coolants are used.
For this reason:
S Only use approved fuels, lubricants and coolants (see the publication entitled "Fuels, Lubricants and
Coolants for MAN Industrial and Marine Diesel engines"). A current list of approved products can be
found on the internet at: www.asp.mantruckandbus.com
Determining the engine oil fill quantity
NOTE
Risk of damage due to incorrect oil quantity
Engine damage
For this reason:
S Determine the fill quantity of the oil pan mounted on the engine. For oil pan oil fill quantity, see follow
ing table or label on a valve cover.
Oil quantities in the oil pan
Engine model MAN oil pan
part number
Minimum
Litres
Maximum
Litres
D2868 LE4.. 50.05801-0002 50 60
D2862 LE4.. 50.05801-0003 70 90
To Next Page
Loading...
Need help?
General
