Manfrotto 521 - Quick Start Guide; Connecting with Support; Connecting with the Camera

GB
QUICK START GUIDE
Conneting with support (square, rectangular, round
tube/pipe/bar)
Clamp range: square or rectangular tube of flat surfaces: 5mm
(0.19”) - 30mm (1.18”) height
Clamp range: round tube/pipe/bar: Ø 12mm (0.47”) to 35mm
(1.38”) diameter
Connecting with the camera
Note! In order to avoid accidental short circuiting the
camera connector, NEVER disconnect the cable from
the controller.
7