Manhattan 177603 User Manual

Level + Flashing
This mode allows you the switch between Level and Flashing modes. When
the scanner is turned on, it is in Flashing mode (see Flashing below). You can
automatically switch to Level mode by activating the beam line. After a period
of inactivity equal to the time specied by the timeout, the scan engine
switches back to Flashing mode.
Flashing
Flashing mode activates the lighting and decoding function (no need to
activate the trigger line). After a period of inactivity equal to the time specied
by the trigger timeout, the scanner starts ashing, checking for a barcode to
be read. When a barcode is detected, the lighting and decoding automatically
turn on and stay on until another period of inactivity (timeout), after which
the scanner starts ashing again.
Autostand
This mode allows you to switch from Flashing trigger mode to Level trigger
mode. Autostand begins in Flashing mode: At power-up, the lighting and
decoding are on (no need to activate the trigger line) and after a period of
inactivity equal to the time specied by the trigger timeout, the scanner
starts ashing. To switch to Level trigger mode, activate the trigger line
(press the trigger). When in Level trigger mode, after a period of inactivity
equal to the time specied by the trigger timeout, the scanner switches back
to Flashing mode.
7
OPERATING SETTINGS

Manhattan 177603 Specifications

General

Wavelength	650 nm
Sensor type	Laser
Scanner type	2D
Read rate (max)	200 reads/s
Maximum scan width	430 mm
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Codabar, Code 11, Code 128, Code 39, Code 93, EAN 128, Industrial 2 of 5, Interleaved 2 of 5, MSI, Plessey, Telepen
Optical sensor resolution (W x H)	752 x 480 pixels
2D (matrix & stacked) barcodes supported	Aztec Code, Data Matrix, MaxiCode, MicroPDF417, PDF417, QR Code
Cable length	1.5 m
Standard interfaces	USB
Connectivity technology	Wired
Input voltage	5 V
Power consumption	435 mA
Power source type	DC
Certification	FCC, CE, UL
Product color	Black
Housing material	Acrylonitrile butadiene styrene (ABS)
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	20 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	193 mm
Width	90 mm
Height	72 mm
Weight	135 g