INSTRUCTION MANUAL
VENUS SMARTWATCH
COMPONENTS
• Venus smartwatch
• USB charging clamp
• Watch strap
• User manual
TECHNICAL SPECIFICATIONS
• Screen: 1.3” high-resolution TFT-LCD
• Color: pink, white, black
• Waterproof standard: IP67
• Charging: USB DC 5 V
• Battery capacity: 180 mAh
• Charging time: about 2 h
• Standby time: up to 5–7 days
• Weight: 141 g
• Support and compatibility: iOS, Android
• Bluetooth version: 4.0
• Material: zinc alloy, ABS, silica gel
• Supported languages: Japanese, French,
German, Italian, Spanish, Portuguese, Russian,
Chinese Simplified, Chinese Traditional, English
• Menu language: English
FEATURES
(1) Screen display area
(2) Touch button area
(3) USB charging clamp
KEY FUNCTIONS
Power on: When the smartwatch is turned off,
press and hold the single-touch area for 3 seconds
to boot and display the main interface of the
smartwatch.
Button operation: Touch the button once to switch
the screen interface, if the current interface has a
sub-interface, long-press the touch button for 3
seconds to enter.
Shutdown: Touching the button once switches
the screen to the “Setting” interface. After long
pressing for 3 seconds to enter the sub interface,
touching the button once again switches to the
"Shutdown”
.
Interface – press and hold for 3
seconds to shut down.
PRODUCT USE
O APP DOWNLOAD
When using this device, you need to connect the
device after downloading the app on the mobile
phone to synchronize the current time information.
Download method 1: Search “Walkfit” (by ISO
System Phone) on Google Play Store or an Apple
Store for download.
Download method 2: You can scan for the app via
QR code.
Download method 3: Press “Other Functions” for 3
seconds at the end of the smartwatch menu to
enter the secondary interface. The single-touch
button switches to the QR code interface which you
scan with your mobile phone.
Note: The requirements of the device for the
mobile phone system: Android 4.4 or above
(Android phone), iOS 8.2 or above (Apple phone),
temporarily not compatible with other system
phones. Bluetooth version 4.0 or above.
Connect APP:
1. Open the downloaded and installed APP
“Walkfit”.
2. Select “Start scanning”
To Next Page
Need help?
General