EasyManuals Logo

Manitou 100 SEC 2 User Manual

Manitou 100 SEC 2
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
1-13
F - DRIVING THE PLATFORM
SAFETY NOTICE
Operators should be aware of the risks connected with using the platform, notably:
- Risk of losing control.
- Risk of losing lateral and frontal stability of the platform.
The operator must remain in control of the platform.
- Do not carry out operations which exceed the capacities of your platform.
- F
amiliarise yourself with the platform on the terrain where it will be used.
- Ensure that the brakes work efficiently when stopping a travelling movement, taking into account the braking distances.
- Drive smoothly at an appropriate speed for the operating conditions (land configuration, load in the basket).
- take extreme care if manoeuvring the platform with the basket in the high position. Ensure you have adequate visibility.
- Take bends slowly.
- In all circumstances make sure you are in control of your speed.
- Travel slowly on damp, slippery or uneven terrain or on truck ramps.
- Always remember that the hydraulic form of steering is very sensitive to movements.
- Never leave the I.C. engine on when the platform is unattended.
- Look where you are going and always make sure you have good visibility along the route.
- Drive round obstacles.
- Never drive on the edge of a ditch or steep slope.
- Whatever your travelling speed, you must reduce the speed as much as possible before stopping.
- The lifting platform must work in an obstacle-free area, where there is no danger descending to the ground.
- The operator using the lifting platform must be assisted by an appropriately instructed person on the ground.
- Comply with the limits shown on the lifting platforms load graph.
INSTRUCTIONS
- When moving the platform a long distance, always travel with the arms folded or the scissors in the low position.
- Engage the appropriate gear (see chapter 2 - DESCRIPTION, CHECKING AND CONTROL INSTRUMENTS pages).
647369 (01/03/2017)
78/100 SEC 2 / 120 SE 2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Manitou 100 SEC 2 and is the answer not in the manual?

Manitou 100 SEC 2 Specifications

General IconGeneral
BrandManitou
Model100 SEC 2
CategoryForklifts
LanguageEnglish

Related product manuals