Need help?Do you have a question about the Manitou MC 18-2 D K ST5 S1 and is the answer not in the manual?
General| Load Capacity | 1800 kg |
|---|---|
| Transmission | Hydrostatic |
| Type of drive | Diesel |
| Load Centre | 500 mm |
| Engine manuf. | Kubota |
| Travel Speed | 18 km/h |
| Mast Type | Duplex |
Guidelines for managers on site, operators, and lift truck suitability.
Foreword, general guidance, operating instructions, and load handling for the operator.
Detailed steps for starting, driving, and handling loads safely.
Guidance on load selection, weight, center of gravity, and picking up/laying down.
General maintenance procedures, lubrication, hydraulics, and electrical checks.
Formal declaration of conformity with EU directives.
Details and locations of safety plates and stickers on the lift truck.
Information on lift truck, attachment, and engine identification plates.
Technical specifications for the MC 18-2 model, including dimensions and weight.
Technical specifications for the MC 18-4 model, including dimensions and weight.
Mast specifications and load chart data for different mast types.
Tire specifications, including pressure and load capacity for front and rear wheels.
Identification and explanation of standard and optional instruments and controls in the driver's cab.
Importance of using original Manitou parts for maintenance and warranty.
Overview of maintenance types: daily, weekly, mandatory first service, periodic, and occasional.
Daily/weekly checks and cleaning tasks authorized for the operator.
Procedures for the mandatory first service after 500 hours or 6 months.
Schedule for periodic maintenance based on operating hours and time intervals.
Tasks for occasional maintenance and specific operational procedures like towing.
Details of filter cartridges and belts for replacement at different service intervals.
Recommendations for engine, cooling, fuel, mast, hydraulics, and washer fluids.
Introduction to interchangeable equipment (attachments) and their use with lift trucks.
Technical data for standardized sideshift carriages and forks.
Information on fork guards and their part numbers.
To Next Page