EasyManua.ls Logo

Manitou Mattoc Pro - Service Manual

Manitou Mattoc Pro
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
pro
2017
Question and Answer IconNeed help?

Do you have a question about the Manitou Mattoc Pro and is the answer not in the manual?

Manitou Mattoc Pro Specifications

General IconGeneral
Spring TypeAir
Travel160mm
Wheel Size27.5", 29"
AdjustmentsRebound, low-speed compression
Axle15mm thru-axle
Steerer Tube1.5" tapered

Summary

Introduction to the Service Manual

Required Tools for Fork Service

Fork Exploded Views and Parts Identification

Mattoc Pro 110 27.5 Exploded View

Detailed diagram and parts list for the 27.5" model.

Magnum Pro 110 27.5+;29 Exploded View

Diagram and parts list for 27.5+/29" Magnum Pro models.

Mattoc Pro 110 29+ Exploded View

Diagram and parts list for the 110 29+ model.

Mattoc Pro 100 26 Exploded View

Diagram and parts list for the 100 26" model.

Mattoc Pro 100 27.5 Exploded View

Diagram and parts list for the 100 27.5" model.

Hayes Performance Systems Warranty Information

Limited Warranty Terms and Conditions

Specifies warranty coverage period, conditions, and exclusions.

Liability Limitations Overview

Defines the extent of Hayes' liability for damages.

Excluded Wear and Tear Parts List

Lists components not covered by warranty due to normal wear.

Casting Removal and Service Procedure

Air Spring Service and Maintenance

Damper Service and Overhaul

Casting Installation Guide

Compression Damper Installation

Oil Height Specifications for Dampers

Table detailing correct oil heights for various fork models.

Mattoc Travel Adjustment Guide

110 mm Boost Hub Spacing Travel Charts

Charts for adjusting travel on 110mm Boost forks.

100 mm Hub Spacing Travel Charts

Charts for adjusting travel on 100mm forks.

Comp IVA Travel Charts

Charts for adjusting travel on Comp IVA models.

Related product manuals