To Next PageTo Next Page
Need help?Do you have a question about the Manitou MT10044XT and is the answer not in the manual?
General| Model | MT10044XT |
|---|---|
| Transmission | Hydrostatic |
| Power Type | Diesel |
| Centre of gravity after loading | 500 mm |
| Tire Type | Solid |
| Lift Height | 4.4 m |
| Turning Radius | 3.90 m |
Identifies potential safety hazards, urging alertness for personal safety.
Details maximum lift capacity and height for various models.
Describes gauges and monitoring lights for machine operation.
Provides engine type, displacement, horsepower, and system details.
Details pump type, displacement, flow, pressure, and filter specifications.
Checklist for essential inspections before machine delivery to the customer.
Steps to ensure safety before cleaning, adjusting, lubricating, or servicing the unit.
Guidelines for safe operation, including stability and personal safety practices.
Information and rules for safe use of the personnel work platform system.
Specific rules for operating the machine when elevating personnel.
Overview of controls and indicators within the operator's compartment.
Description of gauges, indicator lamps, and function switches on the panel.
Function of the lever for changing travel direction and speed range.
Operation of frame level/attachment tilt and boom control joysticks.
Describes joystick functions for boom, attachment, and auxiliary hydraulics.
Guidelines for the initial 100 hours of engine operation to ensure proper break-in.
Operator's responsibility for a daily pre-start inspection of the machine.
Recommended procedures for starting the engine in various temperature conditions.
Critical safety guidelines for operating on inclines and slopes.
Using load zone charts to understand machine capacity based on extension and elevation.
Lists recommended lubricants, grades, and capacities for various machine components.
Safe procedure for jump-starting the machine's battery using jumper cables.
General warnings and safety measures before performing maintenance or repairs.
Procedures for preparing and storing the machine for periods of three months or more.
Procedures to follow after removing the machine from storage and before operating it.
List of suspect parameter numbers and their definitions for diagnostic codes.
List of failure mode identifiers and their definitions for diagnostic codes.
Diagram illustrating the hydraulic system for two-joystick control without PWP.
Diagram illustrating the hydraulic system for tri-function joystick without PWP.
Wiring diagram for the electrical system including radio remote functionality.
Load capacity chart for MT6642XT with standard carriage.
Load capacity chart for MT6642XT with 1.3-Cu.-Yd. bucket.
Load capacity chart for MT6642XT with 12-Ft. truss boom.
