Manitou MT 732 EASY 75D ST3B S1 User Manual

MT 732 EASY 75D ST3B S1
MT 932 EASY 75D ST3B S1
THIS MACHINE IS AN ALL TERRAIN FORKLIFT TRUCK DESIGNED TO OPERATE ON NATURAL OR UNDEVELOPED LAND, OR CONSTRUCTION SITES.
t
IMPORTANT
t
This document is a short recap on how to drive a forklift truck, and should in no way be a substitute for the manual required by Directive 2006/42/CE Annex I § 1.7.4, which should be read and
understood by the operator beforehand and is available in the forklift truck’s cab.
All instructions, including safety instructions, which are in the manual but are not included in this document should be implemented and enforced.
The operator must have received proper training and must comply with the rules in force on road traffic.
TECHNICAL CHARACTERISTICS
WEIGHT OF FORKLIFT TRUCK WITH STANDARD ATTACHMENT
(Transport position)
MT 732 MT 932
- No load 6780 kg 7145 kg
- Maximum load 9980 kg 10345 kg
- Front axle load 3280 kg 3445 kg
- Rear axle load 3500 kg 3700 kg
- Front axle maximum load 8680 kg 8745 kg
- Rear axle maximum load 1300 kg 1600 kg
DRAWBAR PULL ON THE COUPLING HOOK
- No load (slipping) 5300 daN 5530 daN
- Maximum load (timing transmission) 8000 daN 7320 daN
DIMENSIONS
MT 732 MT 932
- A 1200 mm 1200 mm
- B 2810 mm 2810 mm
- C 1193 mm 1128 mm
- D 4761 mm 4696 mm
- F 1930 mm 1930 mm
- I 758 mm 758 mm
- U1 2299 mm 2299 mm
- U2 2488 mm 2488 mm
B
D
C
A
U1
U2
I
F
CONTROL AND SIGNAL LIGHTS PANEL
CONTROL PANEL
A - ENGINE WATER TEMPERATURE
B - REV COUNTER
C - FUEL LEVEL
D - ENGINE PREHEAT INDICATOR LAMP
E - ENGINE PREHEATING FAULT INDICATOR LIGHT
F- CUT-OFF ENGINE INDICATOR LAMP
G - STEERING SYSTEM OIL PRESSURE WARNING INDICATOR LAMP
H - GEAR BOX OIL PRESSURE WARNING INDICATOR LAMP
I - GEAR BOX OIL TEMPERATURE WARNING INDICATOR LAMP
J - BRAKING OIL LEVEL WARNING INDICATOR LAMP
K - PARKING BRAKE INDICATOR LAMP
L - BATTERY CHARGE WARNING INDICATOR LAMP
M - ENGINE OIL PRESSURE INDICATOR LAMP
N - ENGINE WATER LEVEL WARNING INDICATOR LAMP
O - AIR FILTER OR HYDRAULIC RETURN FILTER CLOGGING WARNING INDICATOR LAMP
P - INDICATOR LIGHTS INDICATOR LAMP
Q - SIDELIGHTS INDICATOR LAMP
R - LOW BEAM INDICATOR LAMP
S - MAIN BEAM INDICATOR LAMP
SCREEN DISPLAY
• Drive direction indicator.
• The hour meter.
• The clock.
- Short press button 1 to move successively from one screen to another, hold down
the button to enter the menus.
B
M N OG I K
SRQ
C
P
A
D FE H J L
1
SWITCHES
The location of the switches may vary depending on the options.
A - OPTION Electrical boom pre-equipment
OPTION Head telescope electrovalve
B - OPTION Blue working headlight
C - Wheel alignment indicator lamps
D - Hazard warning lights
E - Rear fog light
F - Self-cleaning fan option
G - Steering selection
H - Transmission cut-off
N - OPTION Engine speed regulator
O - Rotating beacon light
P - OPTION Front and rear working headlights
Q - OPTION Hydraulic locking attachment
R - Neutralization of hydraulic movements
S - OPTION Easy hydraulic attachment connection
T - OPTION Telescope suspension
A DCB
E HGF
N RQPO
S T
This device warns the operator of the longitudinal stability
limits of the forklift. Depending on the type of work
required, the longitudinal stability limiter and warning
device allows the operator to operate the lift truck in
complete safety.
The A8 LED indicates that the forklift truck is at the
authorized limit for longitudinal stability. If the light comes
on, perform smooth hydraulic movements.
HANDLING Use with forks.
“GODET” MODE Use with tipping dumpster.
ACTIVATION: Hold the button for 2 seconds, the
“GODET” MODE is confirmed with a beep and
the indicator light.
OFF: Press the button again.
“SUSPENDED LOADS” MODE For more security, use with a bracket
ACTIVATION: Hold the button for 2 seconds, the “SUSPENDED LOADS”
MODE is confirmed with a beep and the indicator light.
OFF: Press the button again.
A permanently lit fault indicator light, together with a combination
of illuminated LEDs, indicates a major fault liable to affect the safety of the
forklift truck. Refer to the manual.
A8
LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE
BASIC INSTRUCTION SHEET No. 52517602EN (2014/10/10)

Manitou MT 732 EASY 75D ST3B S1 Specifications

General

Brand	Manitou
Model	MT 732 EASY 75D ST3B S1
Category	Forklifts
Language	English