Manitou Mattoc Pro Service Manual

28
MATTOC PRO SERVICE MANUAL
oil height chart 2017-2018
Mastodon pro
mastodon comp
markhor (80/100mm)
circus sport (ffd)
circus comp/expert
machete (kwik toggle, 90-120mm)
machete (abs+)
mattoc comp
mattoc pro
75mm
dorado (see dorado service guide)
87mm
92mm
83mm
R7 PRO
83mm
87mm
87mm
machete (kwik toggle, 130-140mm)
91mm
87mm
75mm
87mm
180-190mm
oil
height
(refers to the air
space between the top
of the oil and top of
the fork leg)
tech support: techsupport@hayesbicycle.com
eu tech support: techsupporteu@hayesbicycle.com
www.manitoumtb.com
fork model oil height
markhor (120mm)
97mm
All forks listed us 5w synthetic oil for the damer, Manitou part number 85-0023.
All forks listed us 5w40 synthetic oil for the lowers, Manitou part number 85-0024.
1. oil height is set with compression damper
removed.
2. oil height is set with fork fully extended
and casting installed.
note
COMPRESSION DAMPER INSTALL

Manitou Mattoc Pro Specifications

General

Spring Type	Air
Travel	160mm
Wheel Size	27.5", 29"
Adjustments	Rebound, low-speed compression
Axle	15mm thru-axle
Steerer Tube	1.5" tapered