Manitou MC 18-2 D K ST5 S1 - DESCRIPTION (Standard); Drivers Cab Access; Drivers Seat; Seat Belt

1 - DRIVER'S CAB ACCESS
- Getting into and out of the driver's cab.
- Use the three support points provided.
1 - Left handle.
2 - Steering wheel.
3 - Driver's cab floor.
ADJUSTING DEPTH (FIG. B)
- Pull lever 2, then move the seat forward or backward into the desired position.
- Release the lever to lock it.
ADJUSTING ANGLE OF BACKREST (FIG. C)
- Pull the lever (3), then tilt the backrest to the desired position.
- Release the lever to lock it.
MAINTENANCE
- Keep your seat clean to ensure it operates efficiently
- Clean the cushions using a suitable product.
- Apply to a small hidden area first, to check the colour-fastness of covering.
- Avoid wetting the cushions.
DESCRIPTION (standard)
2 - DRIVER'S SEAT
ADJUSTING WEIGHT (FIG. A)
- Lower the lever (1) to the desired position.
3 - SEAT BELT
- Sit correctly on the seat.
- Check the condition of the seat belt.
- Place the seat belt at hip level, without twisting it.
- Lock the seat belt.
2-20
1
A
3
C
2
B
2
1
3
647837 M1 (A052020) MC 18-2/18-4 D K ST5 S1