Need help?Do you have a question about the Manitou MC 25-2 D K ST3A S1 and is the answer not in the manual?
General| Model | MC 25-2 D K ST3A S1 |
|---|---|
| Category | Forklifts |
| Load Capacity | 2500 kg |
| Lift Height | 3300 mm |
| Power Source | Diesel |
| Transmission | Hydrostatic |
| Tire Type | Pneumatic |
| Fork Length | 1200 mm |
| Load Centre | 500 mm |
| Standard tyres | Pneumatic |
Guidance for managers on site, operator, and truck suitability for safe operation.
Comprehensive guidance for operators on safe usage, handling, and basic maintenance.
Procedures for starting, driving, and stopping the lift truck with or without loads.
Guidelines for safely selecting attachments, managing load weight, and center of gravity.
Identification and purpose of all safety plates and stickers found on the lift truck.
Information on lift truck identification plates, engine, and pump details.
Detailed technical specifications for various lift truck models, including dimensions and performance.
Identification and function of standard and optional instruments and controls in the driver's cab.
Overview of maintenance schedules, including daily, weekly, and periodic servicing.
Specific tasks for daily and weekly checks, authorized for operator execution.
Requirements for the initial mandatory service after 500 hours or 6 months.
Schedule for routine periodic servicing based on hours or time intervals.
Recommended lubricants and fuel specifications for optimal engine and component performance.
Overview of available attachments and general usage guidelines for the lift truck.
Detailed specifications for various standardized attachments like carriages and forks.
Information on specific protective shields for attachments.
To Next Page