Manitou MC 25-2 D K ST3A S1 - Lubricants and Fuel

LUBRICANTS AND FUEL

IMPORTANT

USE THE RECOMMENDED LUBRICANTS AND FUEL:
- For topping up, oils may not be miscible.
- For oil changes, MANITOU oils are perfectly appropriate.
DIAGNOSTIC ANALYSIS OF OILS
If a service or maintenance contract has been set up with the dealer, a diagnostic analysis of engine, transmission and axle
oils may be requested depending on the rate of use.
(*) REQUIRED FUEL SPECIFICATION
Use a high-quality fuel to obtain optimal performance of the engine.
• EN590 diesel fuel (sulphur content < 10 ppm).
• ASTM D975 diesel fuel (sulphur content < 15 ppm).
RECOMMENDATION
ENGINE
PARTS TO BE LUBRICATED CAPACITY RECOMMENDATION
-40°C -30 -20 -10 0 +10 +20 +30 +40 +50°C
0W30
0W40
5W30
5W40
10W30
ENGINE 8.3 Litres MANITOU PREMIUM OIL 15W40 API CI4
20W50
-40°C -30 -20 -10 0 +10 +20 +30 +40 +50°C
COOLING CIRCUIT Litres COOLANT -35°C
-40°C -30 -20 -10 0 +10 +20 +30 +40 +50°C
FUEL TANK 71 Litres DIESEL OIL *
MAST
PARTS TO BE LUBRICATED RECOMMENDATION
-40°C -30 -20 -10 0 +10 +20 +30 +40 +50°C
MAST LIFTING CHAINS MANITOU SPECIAL CHAINS LUBRICANT
-40°C -30 -20 -10 0 +10 +20 +30 +40 +50°C
GREASING OF THE MAST MANITOU BLACK MULTI-PURPOSE LUBRICANT
HYDRAULICS
PARTS TO BE LUBRICATED CAPACITY RECOMMENDATION
-40°C -30 -20 -10 0 +10 +20 +30 +40 +50°C
ISO VG 100
ISO VG 68
HYDRAULIC OIL TANK 66 Litres MANITOU ISO VG 46 HYDRAULIC OIL
ISO VG 37
ISO V
G 32
OVERHEAD GUARD
PARTS TO BE LUBRICATED CAPACITY RECOMMENDATION
WINDSCREEN WASHER TANK 2 Litres WINDSCREEN WASHER LIQUID
REAR AXLE MC . . -2 / MSI . .
PARTS TO BE LUBRICATED RECOMMENDATION
-40°C -30 -20 -10 0 +10 +20 +30 +40 +50°C
SWIVEL PINS MANITOU BLUE MULTI-PURPOSE LUBRICANT
REAR AXLE MC . . -4
PARTS TO BE LUBRICATED RECOMMENDATION
-40°C -30 -20 -10 0 +10 +20 +30 +40 +50°C
WHEEL REDUCTION GEAR PIVOTS MANITOU BLUE MULTI-PURPOSE LUBRICANT
3 - 10
647690 (29/01/2019)
M
C . . D K ST3A S1 / MSI . . D K ST3A S5
www.duma-rent.com