Manitou MC 25-2 D K ST3A S1 - Drivers Cab Access; Drivers Seat; Seat Belt; DESCRIPTION (Standard)

1 - DRIVER'S CAB ACCESS
- Getting into and out of the driver's cab.
- Use the three support points provided.
1 - Left handle.
2 - Steering wheel.
3 - Driver's cab floor.
ADJUSTING DEPTH (FIG. B)
- Pull lever 2, then move the seat forward or backward into the desired position.
- Release the lever to lock it.
ADJUSTING ANGLE OF BACK-REST (FIG. C)
- Pull lever 3, then tilt the back-rest to the desired position.
- Release the lever to lock it.
3 - SEAT BELT
- Sit correctly on the seat.
- Check the condition of the seat belt.
- Place the seat belt at hip level, without twisting it.
- Lock the seat belt.
DESCRIPTION (standard)
2 - DRIVER'S SEAT
ADJUSTING WEIGHT (FIG. A)
- Lower lever 1 to the desired position.
2-32
1
A
3
C
2
B
2
1
3
647690 (29/01/2019)
M
C . . D K ST3A S1 / MSI . . D K ST3A S5
www.duma-rent.com