Manitou MC 18-2 D K ST5 S1 - Clean; Drivers Cab; Engine Compartment; Inside of the Frame

CLEAN Driver's cab
NOTE: The frequency of cleaning is given as an example.

IMPORTANT

Do not use a high pressure cleaner or water jet.
Take precautions with electrical and electronic components.
- Clean the inside of the overhead guard or the cab using a small brush, vacuum cleaner and a cloth.
CLEAN Engine compartment
CLEAN Inside of the frame

IMPORTANT

Do not use a water jet or high-pressure steam.
- Open the engine cover (2-DESCRIPTION-INSTRUMENTS AND CONTROLS).
- Open the battery access flap 1.
- Remove the protection for the hydraulic controls 2.
- Clean the engine compartment and the inside of the frame using a compressed air jet.
3 - 35
1
2
647837 M1 (A052020) MC 18-2/18-4 D K ST5 S1