Manitou MC 18-2 D K ST5 S1 User Manual


IMPORTANT

Clean all stickers and safety plates so that they are legible.
Any safety plates and stickers which are illegible or damaged must be replaced.
Check that stickers and safety plates are present after replacing any spare parts.
EXTERNAL PLATES AND STICKERS
REF. PART NO. DESCRIPTION
1 24653
- Slinging point
2 234802 - Diesel
3 52563320
- Tie-down point
4 52502757 - Overall height (Option)
STICKERS AND PLATES UNDER THE ENGINE HOOD
REF. PART NO. DESCRIPTION
5 52515083 - Antifreeze and level
6 234798
- Hydraulic oil
7 52664861 - Safety dry air filter cartridge
8 233088
- Engine block heater (Option)
STICKERS AND PLATES IN THE CAB
REF. PART NO. DESCRIPTION
10 Consult your dealer - Load charts (according to model)
*
11 239594 - Sound power 104dB
12 Consult your dealer - Manufacturer's plate
13 300681
- Safety instruction
14 52549319 - DPF safety instruction
15 52681322
- DPF instruction
16 52531617
- Turnover instructions
17 172385
- Towing forbidden
18 253267 - Joystick function
19 52691105
- Lever 3
rd
hydraulic line (Option)
20 52690933
- Lever 3
rd
-4
th
hydraulic lines (Option)
21 52691107
- Lever 4
th
-5
th
hydraulic lines (Option)
22 52691109 - Lever 4
th
line - hydraulic locking (Option)
23 52690934
- JSM function (Option)
24 288174
- Load suspension (Option)
* The load chart referred to in the notice is a standard or blank chart. Each lift truck which can be used with an attachment
has a specific chart. To obtain this, consult your dealer.
SAFETY PLATES AND STICKERS
2-6
647837 M1 (A052020) MC 18-2/18-4 D K ST5 S1

Manitou MC 18-2 D K ST5 S1 Specifications

General

Brand	Manitou
Model	MC 18-2 D K ST5 S1
Category	Forklifts
Language	English