1-27
XXXX Kg
XXXX Lbs
xxxxxx
XXXX Kg
XXXX Lbs
xxxxxx
4 - LOCATION OF THE PLATFORM KEY
The duplicate platform keys (ignition, control selection, cover-opening keys...) are
stored in this location specially provided.
To prevent unauthorised use of the lifting-platform, the customer have the
r
esponsibility to remove the duplicate keys from the files box of the basket on
receipt of a new machine.
5 - WHEEL LOAD
This shows the maximum load that a wheel may exert on the ground.
For the lift-platforms 100SC-2,120SC-2, 140SC
(see 2 - DESCRIPTION: CHARACTERISTICS for the break-through value).
(see 2 - Description: characteristics for knowing the punch-through value).
6 - LOAD ON THE STABILISERS
This indicates the maximum load that a stabiliser will exert on the ground
For the lift-platforms 100SC-2,120SC-2, 140SC
(see 2 - Description: characteristics for knowing the stabilisers-through value).
7 - FREEWHEELING PROCEDURE
This describes the procedure for setting the machine in freewheeling mode when an
accident occurs or a breakdown puts the electric control boxes out of action.
(see the description in Section 2).
647367 (01/03/2017)
100/120 SC-2 / 140 SC
To Next Page