Manitou 140 SC - Lifting Platform Maintenance Tasks

3-11
A = REGULATE, C = CHECK, G = GREASE,
N = CLEAN,
P = BLEED, R = REPLACE, V = DRAIN
PAGE
(1)
DAILY OR EVERY
10 HOURS
OF OPERATION
EVERY 50 HOURS
OF OPERATION
EVERY 250 HOURS
OF OPERATION
EVERY 500 HOURS
OF OPERATION
OR 6 MONTHS
EVERY 1000 HOURS
OF OPERATION OR
1 YEAR
EVERY 2000 HOURS
OF OPERATION OR
2 YEARS
EVERY 40000
HOURS OF
OPERATION
OCCASIONAL
ELECTRICAL SYSTEM
Condition of the joystick bellows
3-13 C <<< <<< <<< <<< <<< <<<
Level of battery electrolyte 3-17 C C <<< <<< <<< <<< <<<
Density of the battery electrolyte 3-20 C C <<< <<< <<< <<<
Tilt sensor 3-20 C <<< <<< <<< <<<
Overload sensors 3-20 C C <<< <<< <<< <<<
Emergency pump 3-21 C C <<< <<< <<< <<<
Condition of the cable bundles and the cables C** <<< <<<
FRONT AND REAR AXLE
Rear axle brake disc wear
C**
Universal joint for rear wheel reducers C**
Oil level for wheel reducers R R <<< <<< <<< <<<
Play in the rear wheel reducers C**
CHASSIS
Axles
G <<< <<< <<< <<<
Tightening the bolts fixing the axles to the chassis C <<< <<< <<< <<<
LIFTING PLATFORM
Pre-operation inspection
3-14 C C <<< <<< <<< <<< <<< <<<
Function tests 3-14 C C <<< <<< <<< <<< <<< <<<
Safety labels C <<< <<< <<< <<<
Freewheeling XXX
Hoisting the lifting platform with a sling XXX
Transporting the lifting platform on a truck bed XXX
Maintenance stand
(*): Every 10 hours for the first 50 hours and then a final time after 250 hours.
(**): Contact your dealer.
647367 (01/03/2017) 100/120 SC-2 / 140 SC