EasyManua.ls Logo

Manitou 140 SC - Page 99

Manitou 140 SC
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-27
E8 - State of the hoses and rubber pipes
CHECK
- Check the apparent condition of the hoses (cracking), which are subject to thermal stresses and UV; their technical characteristics may
be affected (porous spots).
WARNING ABOUT LEAKS
Hydraulic oil escaping under high pressure can penetrate the skin and cause severe injuries. Immediately consult a doctor
if anyone is injured by a high-pressure jet of oil.
If you are in any doubt about a possible leak, do not look for it with your hand; instead, check with a piece of cardboard,
while protecting your hands and body.
For safety’s sake, replace any worn hoses.
E9 - State of the cylinders (leaks, rods)
CHECK
E10 - State of the cable bundles and the cables
CHECK
E11 - Front & rear wheel reducer oil
DRAIN ī˜† REPLACE
*(Contact your dealer)
647367 (01/03/2017)
100/120 SC-2 / 140 SC

Table of Contents

Related product manuals