Manitou 160 ATJ PLUS Euro 3 - Page 11

1-7
C - MAINTENANCE
- The operator must immediately advise his superior if his platform is not in good working order or does not comply with the safety
notice.
- The operator is prohibited from carrying out any repairs or adjustments himself, unless he has been trained for this purpose. He
must keep the platform properly cleaned if this is among his responsibilities.
- The operator must carry out daily maintenance (see chapter : 3 - MAINTENANCE, A - DAILY pages).
- The operator must ensure tyres are adapted to the nature of the ground (see area of the contact surface of the tyres in the
chapter : 2 - DESCRIPTION : CHARACTERISTICS pages). There are optional solutions, consult your dealer.
Do not use the platform if the tyres are damaged or excessively worn, because this could put your own safety or
that of others at risk, or cause damage to the platformk itself.
- In the case of electric platforms, the operator must ensure that:
- The batteries are not replaced with lighter ones (compromising stability).
- Safety goggles are always worn when charging the batteries.
- The batteries are not charged in an explosive environment.
- There is no smoking and no naked flame directed towards the batteries when they are being handled
- During removal, re-installation and checking the levels.
D - MODIFYING THE PLATFORM
- For your safety and that of others, you must not change the structure and settings of the various components used in your
platform yourself:
 K\GUDXOLFSUHVVXUH
 FDOLEUDWLQJOLPLWHUV
 ,&HQJLQHVSHHG
 DGGLWLRQRIH[WUDHTXLSPHQW
 DGGLWLRQRIFRXQWHUZHLJKW
 XQDSSURYHGDWWDFKPHQWV
 DODUPV\VWHPVHWF
- In this event, the manufacturer cannot be held responsible.
Your lifting platform is delivered with standard wheels or all-terrain wheels. It is FORBIDDEN to switch from one
type of wheels to another: RISK OF THE LIFTING PLATFORM BECOMING UNSTABLE.
E - IC PLATFORM AXLES
- STANDARD AXLE :
The chassis is rigid, so the platform can have a ground reach on only three wheels.
- OSCILLATING AXLE (IF THIS OPTION IS AVAILABLE) :
An oscillating axle enables the platform, when in transport position, to have a ground reach on four wheels. When
moving in working position over uneven terrain, the oscillating axle is locked (the chassis is rigid) so the platform
can have a ground reach on only three wheels.
547408 EN (15/05/2012)