2-40
A
C
B
2
1
B
TRANSPORT POSITION
TRANSLATION
FORWARDS
TRANSLATION
BACKWARDS
USE OF THE PLATFORM
BEFORE STARTING THE PLATFORM
- Check the following levels:
• Engine oil
• Hydraulic tank oil.
• Coolant.
STARTING THE PLATFORM
- Turn the ignition key 1 to position B to switch on the ignition (Fig. B).
- Press the button 2 to start the engine (Fig. B).
Do not engage the starter motor for more than 30 seconds and carry out the preheating between unsuccessful
attempts.
- Release the button as soon as the engine has started and leave to idle.
Ne
ver try to push or pull the platform to start it. This would cause serious damage to the transmission.
To Next Page
Loading...
