Manitou A Series Operator's Manual

2 - 31
ADJUSTMENT OF THE ANGLE OF THE BACK-REST (FIG. G)
- Support the back-rest, pull the lever and position the back-rest to find the
desired position.
LONGITUDINAL ADJUSTMENT (FIG. H)
- Adjust the locking lever until you reach the position required. This then locks
and the seat will not shift into another position.
MAINTENANCE (FIG. I)
Dirt may adversely affect the correct functioning of the seat. For this reason,
make sure your seat is always clean.
- To clean or change the cushions, simply remove them from the seat frame.
Avoid wetting the cushion fabric when cleaning. Check the resistance of the
fabric on a small hidden area before using any fabric or plastic cleaner.
G
H
I
If you do not support the back-rest when making
adjustments, it swings completely forwards.
IMPORTANT
A rocking head-rest increases the risk of an accident!
CAUTION
FORKLIFT SAFETY
CONTENTS

Manitou A Series Specifications

General

Brand	Manitou
Model	A Series
Category	Front End Loaders
Language	English